SolidMax™  are Tradmark of SM WORKHOLDING, LTD.,  © Copyright  2004  All Rights Reserved.


Hydraulic VS Mechanical
When your Hydraulic Jaws should get low on oil after repeated use, follow these directions:
1. Open up the sealing plug on the end to expose the fill hole.
2. Pull all the pistons out so they extend approx. 1/8" from the     face of the body.
3. Add Hydraulic jack oil to the top of the fill hole
4. Put your thumb over the fill hole and with the fill hole facing       up, tap the Hydramax gently on a wood or plastic surface to     bring the bubbles to the surface.
5. Repeat steps 3 and 4 until no more bubbles come up.
6. Close the fill hole and you're back in business.
SolidMax Jaws after repeated use, follow these directions:

NONE


Movable jaw is replaced by self-adjusting SolidMax™ vise jaw were each plunger works independently with equal force to push against each part with a variation of up to 1/16" in sizes of parts by utilizing a MECHANICAL DESIGN. 

Stationary or solid jaw is replaced with a double V-block to hold six parts simultaneously ranging from 1/4 inch to 1 inch in diameter on the front side, or three parts ranging from 1 inch to 2 inches in diameter rear side.

VERSATILITY OF ONE SOLIDMAX P/N: K63-1.03
Hold 6 Parts 0.25" – 1" DIA.
Hold 4 Parts 1" – 1.50" DIA.
Hold 3 Parts 1" – 2" DIA.
Hold 2 Parts 2" – 3" DIA.

The SolidMax™ is available in 4, 5, 8 or 10 plunger configuration per customers request. 
The SolidMax™ Multi-Part Workholding System

SM Workholding, Ltd. has developed and patent vise jaws called SolidMax™ Workholding System, a modular solution for multi-part workholding.  The  The SolidMax™ Workholding System, will grip and hold multiple parts with 1/16" variations in size at the same time.

The SolidMax™ mounts easily in seconds to just about every type of milling vise out there including KURT®, CHICK®, andothers with no modification.  All units come with pre-tapped plungers for tooling accessories and are hardened and ground for superior precision.  All parts are griped and held with the same force even fragile parts can be held securely, without crushing pressure.  Part movement is eliminated. In addition, broken cutters, damaged parts, and dedicated or custom built fixtures are eliminated as well.
HOW It WORKS: